Thermal facade systems

Termozol XPS

High strength and thermal protection

 

Termozol XPS

The thermal system Termozol XPS is right solution for thermal protection of facade surfaces exposed to high mechanical loads, thermal protection of the object plinth - socle, as well as for areas splashed by water and in contact with the ground.

Termozol XPS, certified according to ETAG 004, with sheets of extruded polystyrene (XPS).
 

Strength and protection from foundation to roof.

 
     
» Binding
 

1Samoterm® F

The polymer-cement mortar for bonding and for the first application of base coat.
» Thermal insulation panel
 

2Extruded polystyrene (XPS F)

Panel of extruded polystyrene, thickness by choice
» Angle profile with mesh
 

3Aluminium/PVC with fiberglass mesh

10x15 cm for mechanical protection of corners
» Anchors (tiples)
 

4Anchor  MIK

Polyamide anchor for additional mechanical fixing of thermal insulation panels
» Certified reinforcing mesh
 

5Samoborka PRIMAFAS 160

Alkali resistant fiberglass mesh type Samoborka PRIMAFAS 160, yellow coloured (certified for installation in ETICS in Croatia)
» Reinforcement
»Impregnation
 

7Mineralkvarc Grund coloured

Basic topcoat for the impregnation of the substrate before applying the finishing coloured mineral, silicone and acrylic plaster
 

7Silikatgrund coloured

Primer for the impregnation of mineral substrates before application of SILICATE PLASTER
» Finishing facade plasters
 

8Acrylic plaster

Finishing decorative plaster

TERAKRIL Z - Polymer and waterproof ­finishing decorative plaster of dash fi­nish ("grainy") texture / grain size of 1.5 mm, 2 mm, 3 mm
TERAKRIL R - Finishing decorative plaster grated texture / grain size of 2 mm, 3 mm
TERAKRIL VA - Finishing decorative plaster rolled texture / grain size 1 mm
TERAKRIL Š - Finishing decorative plaster sprayed texture, grain size 1,5 mm
 

8Silicate plasters

Finishing decorative plaster

SILICATE PLASTER Z - Polymer and waterproof ­finishing decorative plaster of dash fi­nish ("grainy") texture / grain size of 1.5 mm, 2 mm, 3 mm
SILICATE PLASTER R - Finishing decorative plaster grated texture / grain size of 2 mm, 3 mm
SILICATE PLASTER VA - Finishing decorative plaster rolled texture / grain size 1 mm
SILICATE PLASTER Š - Finishing decorative plaster sprayed texture, grain size 1,5 mm
 

8Silicone plasters

Finishing decorative plaster

SILICONE PLASTER Z - Polymer and waterproof ­finishing decorative plaster of dash fi­nish ("grainy") texture / grain size of 1.5 mm, 2 mm, 3 mm
SILICONE PLASTER R - Finishing decorative plaster grated texture / grain size of 2 mm, 3 mm
SILICONE PLASTER VA - Finishing decorative plaster rolled texture / grain size 1 mm
SILICONE PLASTER Š - Finishing decorative plaster sprayed texture, grain size 1,5 mm
 

9SEP Z 200, SEP Z 300, SEP 03

Mineral finishing decorative plaster of dash finish ("grainy") or grated texture , grain size2 mm, 3 mm
» Socle profile
 

9Aluminium trough

For socle processing, profile width depends on the thickness of plate, length 2,5 m/piece